Description

A universal cleaner, Fernox FC3 Cleaner can be used for pre-commissioning new installations as well as removing sludge and loose scale in existing systems, to improve efficiency levels. Ideal for larger light commercial and HVAC applications, this product is compatible with all commonly used metals and materials found in central heating systems. It is also suitable for use when powerflushing and its environmentally friendly formulation makes it an ideal choice.

  • Cleaner for commercial heating and cooling systems
  • Pre-commission cleanser for new installations
  • Removes sludge and loose scale and restores efficiency of existing systems
  • Compatible with all metals and materials commonly used in heating and cooling systems
  • No neutraliser required
  • Suitable for use with all known powerflushing machines
  • Non-acidic formula
  • Non-hazardous, environmentally friendly

Physical Properties
Colour: Orange
Odour: Aromatic
Form: Liquid
pH (conc): 6.5
pH (1% soln) 6.9
SG: 1.09 at 20°C

 

Application and Dosage

For optimum results, the entire system should be completely drainable. Fernox FC3 Cleaner should be dosed at a concentration of 1% and can be introduced into the system via a suitable dosing point. For pre-commission cleaning, circulate Fernox FC3 Cleaner for at least three hours at normal operating temperature. To remove sludge from existing systems, circulate under normal operating conditions, for up to 7 days until acceptable flow around the system has been achieved. Additional/repeat applications of Fernox FC3 Cleaner may be necessary if systems are heavily sludged. Drain and flush with cold water until the water is clear and the Fernox FC3 Cleaner has been rinsed from the system. Fernox FC3 Cleaner will usually be removed after 3 complete flushes. Finally, add Fernox FC1 Inhibitor (or an appropriate Fernox inhibitor) to prevent further corrosion damage and scale deposits.

 

Packaging, Handling and Storage

Fernox FC3 Cleaner is supplied in 20 litre drums. Fernox FC3 Cleaner is classified as non-hazardous, but as with all chemicals: Keep out of reach of children. Do not mix with other chemicals. Do not take internally. In case of contact with eyes or skin, rinse immediately with plenty of water.

Please contact the supplier to check availability of stock