Description

For use with a Powerflow Flushing Machine, this universal Adapter allows for easy connection to a heating system via a Fernox Total Filter, and provides full flow rate to optimise cleaning efficiency. This TF1 Flushing Adapter uses the same fixings and valves as either a 22mm or 28mm Fernox TF1 Total Filter.

  • Easy flushing with connection via the Fernox Total Filter TF1
  • Provides full flow rate to optimise cleaning efficiency
  • Fernox TF1 Flushing Adapter is rated to 85°C and fully acid resistant

Instructions for use

  1. Close the isolating valves on the Fernox Total Filter TF1 and remove from system leaving the valves in situ.
  2. Using either the original rubber seals or replacements provided with the Fernox TF1 Flushing Adapter, fit in place of the filter as show in the photograph.
  3. Connect your Powerflow Flushing Machine to the Fernox TF1 Flushing Adapter. Use only PLASTIC (PP) ¾" female nut liner and seals, as provided with the Fernox Powerflow Flushing Machine and Fernox TF1 Flushing Adapter. Secure these to the hoses with screw clamps.

Care and Maintenance
Used appropriately the Fernox TF1 Flushing Adapter is maintenance free. The unit is factory sealed and should not be disassembled.
Spare parts for the Fernox TF1 Flushing Adapter are available from our sales office by calling 0330 100 7750.

Please contact the supplier to check availability of stock