Description

The TF1 Delta Filter is a quality nickel –plated, brass filter which is most suited to large volume, low temperature heating and cooling systems, It protects key components from magnetic and non-magnetic debris as well as removing trapped air from system water. It is easy to install , service and clean and can be used in line or on a bypass .It uses three types of filtration to offer the ultimate in system protection for light commercial systems.

  • Optimum performance with magnetic and hydrocyclonic filtration
  • Fast and easy to install close to the wall (with minimal pipe alterations necessary)
  • Fits horizontal and vertical pipework in both flow directions
  • Fast and easy to clean without dismantling the filter
  • Maximum working pressure of 16 bar (232 psi)
  • Automatic Air Vent with Auto Shut-off Valve - 12 bar (174 psi)
  • High grade, high temperature rated neodymium magnet

WEIGHT
Filter weight only
2” Euro Valve 17kg (38lbs)
BSPP (ISO 228) Female Valves
2” USA Valve 17kg (38lbs)
BSPP (ISO 228) / NPT (ANSI B1.20.1) Female Valves
2” No Valve 17kg (38lbs)
BSPP (ISO 228) Male Filter No Valve
2” USA Flange 23kg (51lbs)
ANSI 150 B16.5 Spec Flanges
2” ROW* Flange 24kg (53lbs)
EN 1092 (DIN) Spec Flanges * Rest of the world

 

Internal Volume: 3.2L (0.84 US Gallons)
Max Flow Rate: 200L/min (53 US Gallons)
Max Temperature: 120°C (248°F)
Max Pressure: 16 bar (PN16) (232 psi)
Drain Valve: 3/4” x 1” BSP (ISO 228)
Filter Seals: EPDM Peroxide cured
Material: High quality, nickel-plated, machined brass alloy

Fill out your details below, and we will send your warranty to you by email.

Please tick this box to indicate that you have read and understand the terms and conditions.

Please contact the supplier to check availability of stock